Blog

Steps To Prevent Plumbing Problems in Your Home

By admin . January 17, 2011 . Filed in Uncategorized. No comments »

The piping system in the house the most important thing that needs to be taken to consideration when one is in the process of house renovation. There are many dangers that occur when one does not put plumbing into consideration. First and foremost, you need to ensure that the piping system has undergone a thorough check before use. The toilet, sink bathroom and toilet systems are the most important. This is because they influence all the drainage activities that take place in the house. There are certain steps to prevent plumbing problems in your home. These particular steps are very important because they help in preventing plumbing disasters. Without proper bathroom plumbing, you will not be able to use your bathroom or toilet comfortably. It is therefore very important to take the steps to prevent plumbing problems into consideration. The first basic step you need to tale is ensuring that all the water drainage strainers have been thoroughly washed. Without cleaning the strainers, all the collected impurities will have a tendency of getting into the water drainage. This mostly applies in bathroom drainages, kitchen sinks and laundry drainages.

Step two states that you should pour grease in the pipes that cause the clogging effect rather than pouring on the sink drainage. The grease mainly plays a function of getting rid of the clogs that usually cause blockage in the water drainage systems. Grease and fat deposits are commonly found in kitchen sinks. They are the main reason why kitchen sinks have a tendency of blocking. Make a point of pouring boiling water through the troughs in the sinks. The main function of the hot water is to get rid of the excessive fat deposits that cause the blockage problem. The third step to prevent plumbing problems in your home is that you need to avoid pouring hot wax and paint in the sink. This is because they permanently dry up in the drainage system, hindering the drainage system from functioning properly. Ensure the only substance that goes through the sink or drainage system is water. This way, you will be able to avoid the plumbing nightmares.

The other step to prevent plumbing problems in your home states that you need to consider the type of your drain cleaner. In this case, you need to ensure that you are using the non-corrosive type of a cleaner. What needs to be precisely done is that the drain is supposed to clean in every six months in order to avoid drainage problems. The reason why you are restricted to a non-corrosive type of drainage cleaner is that it keeps the metallic drainage system from corrosion. Finally, the kitchen sink needs to be maintained because it needs proper care. The precaution you need to take is ensuring that before you clean your dishes ensure that they have no food particle remains. This way, you will be able to avoid the sink drainage disasters. The steps to prevent plumbing problems need to be taken to consideration for the good of your home plumbing system.

Why Commercial Service Agreements Are Necessary

By admin . December 22, 2010 . Filed in Uncategorized. No comments »

Whenever there is any hiring or purchase of equipment, there is a need to ensure that the customer and the seller both benefit from the transaction and that there is no party who will be left with a list of losses while the other one gains from the deal. This can be done by the provision of a commercial service agreement that caters to the needs of both parties. They are often used by building owners and contractors. Most of the known commercial service agreements will include things such; as regular maintenance, this will establish how often the equipment will be serviced. A good commercial service agreement should also cover the cost of breakdowns and have a detailed provision of what happens in case there is a need for the equipment to be replaced at any one point.

Commercial service agreements would be of no use if they did not aid in making the lives of homebuilders easier. They therefore go a long way in taking care of some of the concerns that they might have. Key among these issues is they ensure that at no point will the homebuilder be caught with their guard down. This is because everything they need to know about the equipment is included in the agreement. In addition, to the homebuilders, they ensure that the equipment they are getting is safe and they have a knowledge on who they are supposed to contact in the event that the equipment turns out to be faulty. In addition to this, the accountants working for the homebuilders get to have easy time when writing out the cheques because it will be to the same people with the same amount every other month.

To the contractor the benefits commercial service agreements are equally the same if not more. The contractor will be looking to making more profits. This is because they will be called in to inspect the equipment and this means that they will make more money and as such increase the rate of their cash inflow with a big margin. They will also get to have work even when the market demand is slow. By this, it means that though people might not be coming in anymore, the contracts they have can sustain them, as they will be called in for things such as maintenance and repairs. Some of the things to consider before agreeing to any of these contracts include surveying the equipment. It is important to note that any kind of equipment whether old or new can be sold and a price tag attached to it. A fee is attached to surveying of equipment and customers are required to understand this in advance. They should also know that in the case they do not agree with the contract they still have to pay this fee. Once the survey is complete, the homebuilder and the contractor have to consult with the technician and set up the pricing of the equipment.

Water Jetting: Maintaining Drains Using Our Jetting Service

By admin . December 06, 2010 . Filed in Uncategorized. No comments »

Blocked drains in and around the house can be frustrating thing that can bring the whole drainage system to a halt. Unblocking clogged drains can be an even more daunting task that just may require professional plumbing services. Slit and sediment that clog a drainage system can be cleaned using the water jetting services also called hydro jetting. This process utilizes high-pressure water to clean surfaces and pipes that are difficult to access, as well those that can be reached easily.

Maintaining drains using our jetting service involves an electric sewer machine that reaches the dirt in the drainage, scours, and flushes it out in one go. Water jetting is a green technology because it does not use chemicals or procedures that do not harm the environment. The most effective tool used by professional plumbers is the water jetter whose main components are the nozzle, hose line, pressure generator, the drive as well as measurement and safety devices. The nozzle emits high-pressure water that cuts through the slit, slime and sediments that clog the pipes.

In maintaining drains using water jetting services the equipment is placed in the downstream of a drainage system and then works upstream scouring the debris that clog the pipes. This allows water to flow downstream through the drainage without the risk of further blockages. The great thing about using water jetting for plumbing solutions is that the process is a very powerful one and can cut through just about any entrenched debris in the drainage pipes as well as sewer lines.

With JA Plumbing maintaining drains is made possible through the inspection of the drainage system before embarking on the task of water jetting the clog. This is done with the use video technology to inspect even the most hidden areas of the blocked drainage. The inspection is done prior to the clean in an effort to show their client the condition of their pipes and done after wards for client satisfaction. The real time video transmission equally detects any damages cause to the drainage thus ensuring that sewage repair and water jetting are done simultaneously. Maintaining drains using water jetting is a 24-hour operation with this company. They are qualified plumbing professionals who work in both domestic and commercial drainage system projects. They offer prices that are competitive and fair.

The great thing about using water jetting as a plumbing solution is that it is safe with the pipes and sewer lines, its cleaning is lasts longer and thus prevents the tendency of debris to pile back up and cause further clogging. Professional plumbers of companies should do using water jetting because the machinery may cause serious damage to property and may cause fatal bodily harm due to the high pressure. Maintaining drains using jetting services is the fastest and most effective way to safely eliminating debris and clogged sediments in the commercial and residential drainage systems. Maintaining drains using jetting services need only be done once annually if it is done professionally.

Why the Training? – Certification by Manufacturer’s Reps on New Products Is Important

By admin . November 29, 2010 . Filed in Uncategorized. No comments »

The plumbing industry is one industry that is so connected to our day-to-day lives that it calls for constant training/certification by manufacturer’s reps on new products. Such products may be untested before and therefore technicians who will install them must be adequately briefed and trained. The manufacturers of plumbing products must keep in touch with the changing needs and requirements of the customers. This is to say that they must keep on researching and inventing technology so that they guarantee the customer satisfaction. Sometimes a valve or a spare part used in plumbing could be found to be faulty and likely not to last for long. The manufacturers could therefore think of ways that they can come up with to make it more durable. Once they have come up with an invention, they must ensure that they train those involved with the installation, who more often than not are   the technicians.

Another important point to note is that the plumbing industry must work closely with other industries that are involved with general health and sanitation of the customer. This includes the ministry of health that ensures that much as it is the responsibility of the plumber to meet all the plumbing needs of the customer, they do so in a way that is healthy and safe. For example, the recent legislation by most states that the type of pipes used in plumbing must be certified and found to have a certain level of lead, or in other words “Lead free”. This particularly affects those pipes that come into direct contact with water for drinking. Lead content in such pipes must not exceed 0.25 %. These certifications are meant to protect the customer and the lead average in each plumbing pipe is determined by the wetted component multiplied by the proportion of the total wetted surface area represented by that pipe, then sum up the results. To ensure that customers are also knowledgeable and informed, training / certification by manufacturer’s reps on new products has been taken a notch higher.

The manufacturer’s reps are going to homes or seminars and demonstrating how some of the new products can be installed or even how one can fix some easy mishaps. This is a big step forward in ensuring that the customer does not have to keep calling the manufacturer for every plumbing need. It is also a fact that most plumbers are not necessarily the manufacturers of the equipment they use in their work. Therefore, training / certification by manufacturer’s reps on new products to the plumbers helps them become better acquainted with the new products. Being better acquainted means that they are more efficient in their work, and will have no trouble when they have to use of a new product. A manufacturer’s rep acts as the avenue through which  the manufacturer gets to have their new products certified, as well as training plumbers and customers alike on how best to use the products. By so doing, they ensure that the customer enjoys quality and safe products.

Tankless Water Heater Energy Efficiency vs. Conventional Water Heater Efficiency

By admin . November 17, 2010 . Filed in Uncategorized. No comments »

Tankless water heaters are a perfect source of energy. They are well known to be energy conservers. This is because they are designed in such a way that they are energy efficient. Tankless water heaters are very economical because they are known to heat water directly and without the use of a water tank. The main reason why they are mostly preferred is that they avoid working on standby. This way, energy losses are avoided. The tankless water heater energy efficiency is just perfect for heating large amounts of water. When the hot water tap in the tankless water heater is turned on, cold water flows through a certain pipe whereby it reaches a destination that heats it by the use of water heating elements or gas burners. As a result, the water heater produces a constant supply of perfectly heated water. The advantage behind making use of a tankless storage tank is that you do not have to wait for the storage tank to fill up so then; it consequently heats up the water. What actually happens is that the cold water is heated as it gets in to the pipe.

The tankless water heater energy efficiency is just the best. This is because they typically provides water at a maximum rate of 2 to 5 gallons that is equivalent to 7.6 to 15.2 liters per minute. This is an incredible performance because the user will be able to utilize a handsome amount of money and at the same time save a lot of energy. The majority always prefers to make use of hot water systems that economize a lot on the energy. With good consumption of energy, electricity bills and gas costs will be relatively cheaper. The main applications for the tankless water heaters include hot tubs and remote bathrooms; in dishwasher systems and cloth washers; as a booster for the solar water heating system. In order you maintain the tankless water heater energy efficiency, you need tom ensure that you have perfectly installed the system. The mistake that most people do is installing the system without proper care and keenness. When the water heating system is installed with care, a lot of energy will be conserved. The fuel type, the local building code essentials, and safety issues. Just make sure that as you install the tankless water heating system, everything is perfect for energy conservation.

The Conventional water heater is also well known to be the most popular and best water heating system that is used at home. A water heater is a great essential at home. In most homes, it used almost daily nothing can be done without heating water. The conventional water heater is well known to be energy efficient compared to the tankless water heater. It is called the conventional water heater because it is widely used by mainly. On the other hand, it offers a readymade reservoir that performs to a maximum of 20 to 80 gallons of hot water. It mainly operates by producing hot water from the top of the tank immediately the tap is turned on. This process is very perfect for energy consumption because unlike the tankless water heater, the water is instantly heat. The conventional

Why Pex Plumbing Costs Less Than Copper and is Widely Used

By admin . November 10, 2010 . Filed in Uncategorized. No comments »

Homeowners are finding it a trifle hard when it comes to choosing piping for their homes. This is because if they happen to go for material that is not of the best quality then it is bound to rust quickly and necessitate the provision of new piping and this can be a costly issue and a constant cause of inconvenience. That is why it is important know that when it comes to piping, then Pex plumbing costs cheaper than copper and it is more durable.

Pex plumbing involves a couple of processes such as Pex tubing, Pex fittings, and Pex manifolds. Most people are now choosing to replace copper with Pex plumbing because it is easy to install. Unlike if, the installations are made with the use of copper, Pex plumbing does not require too much fittings because it is flexible and does not, for instance require, and elbow fittings. What is more, unlike copper which needs to be cut, with Pex plumbing, it will be a clear and neat connection and the workers will enjoy making the installations because they are light weight and easy to manage.

Pex plumbing costs less than copper by a margin of up to 95 percent. This is most attributed to the fact that since it is easy to install, then that means that there will be less days taken to install it and as such cutting down on the amount of labor cost to be paid. It also means there is less manpower required to install it due to its light nature that makes it easy to handle and lift. When it comes to energy conservation, Pex plumbing is the best there is in the market, unlike its counterpart copper that is known to lose heat fast. Pex plumbings are also known to weather any kind of climate because they do not have the capability of freezing nor do they succumb to built ups. When talking about build-ups, it refers to all the corrosive materials which accumulate over time leading to rotting away of most plumbing materials and especially copper plumbing. Pex plumbing has a smooth interior and this is what usually fights off the corrosive materials.

When Pex plumbing is used, as with other things there will be times when repairs and maintenance will be necessary. This is where the best thing about Pex plumbing comes in, because of its easy nature to install, when the need for maintenance arises, it will be easily achieved since the plumber will not take so much time doing it. This will also mean that there will be no prolonged series of plumbing inconveniences in the household. The fact that there are so many plumbers opting to use Pex plumbing more than copper or any other form of plumbing means that indeed, Pex plumbing costs less than copper and that it is highly reliable and cost effective. Consultations with plumbers before installation are imperative to prove this point and put reservations at ease.

Service for All Brands of Tankless Water Heater and Why You Need To Invest In One

By admin . November 01, 2010 . Filed in Uncategorized. No comments »

When choosing to buy water heaters there are so many things that come to play and should be considered before going out to make that final purchase. Key among them are; how are the water heaters going to be of benefit, how long can they be of service before servicing is required and how effective will they be in ensuring that the water retains its heat and does not necessitate constant re-heating. Getting service for all brands of tankless water heater has now become an easy task thanks to dealers who are offering the installation of the tanks and at the same time providing expertise service in the event that the tank becomes faulty or is in need of repairs.

When deciding on if to buy a tankless water heater, the supplier should be able to guarantee that in the event it turns out to be faulty, there can be a replacement and if not they will offer service for all brands of tankless water heater bought from them. This ensures that no matter the model one chooses, service is guaranteed. Some of the service for all brands of tankless water heater should be the installation. To cut down on costs, the company one is buying the tank from should provide proper installations that will leave one with a functional water tank that does not raise cause of worry.

After establishing the service part, it is time to find out why everyone needs to invest in a tankless water heater. First on the list is that tankless water heaters go a long way in saving the space either in your home or in the garage depending on where it is placed and this is because it has a variably small footprint. It is also important to know that investing in a tankless water heater ensures that energy is saved at a very considerable rate. This is greatly due to the fact that the tank has the capability of preserving heat up to around eighty-five percent retention and as such ensuring there is no need to keep turning on the heater and consequently saving up to thirty percent in electricity bills.

With a tankless water heater, there is also a guarantee of endless supply of hot water. This is because tankless water heater does not provide water based on gallon measurement but rather on a flow rate. What this means is that as long as the water does not exceed the maximum flow rate, there will be a constant flow of hot water. At any given time, it is hard if not impossible for the water in the tankless water heater to exceed this limit. Another beauty of investing in the tankless water heater is that it is highly durable and one can choose the size they want and what is more, one can have the option of installing several tankless water heaters in one location if they so wish especially if they have large families that need a constant supply of hot water.

Benefits of Using Video Drain Inspections

By admin . October 27, 2010 . Filed in Uncategorized. No comments »

Video drain inspection is a new state of the art mode to inspect drainage system and pipes without having to remove them. It is mostly used to identify faults in the drainage like dirt or debris that might need some cleaning. It can also be used to identify any build up sludge within the system. This shift from the traditional way of assessing pipe conditions is much easier. The traditional way of locating any blockage was so difficult and time consuming, it needed a lot of labor and resources. However, with the video drain inspection, you are able to see every detail in the drainage.

It becomes easier to locate dirt and you are in a position to prevent debris from building up and consequently causing blockage of the system. With this kind of technology, you will be able to make better, informed, and sound decisions based on the reliable information. There is direct evidence that reduces on guessing of what should be done. It allows you to work only where there is need; you are able to identify a spot that needs cleaning and only work on that particular place rather than cleaning the entire system. This reduces on time and costs for the company.

Video drainage inspection cameras at times come with light heads for directions. They come with tractor units that drive the cameras, tilt, and pan camera heads to give all directions, and control units that guide the system. They also come with other facilities to help solve any unusual circumstances that you may encounter. The cameras also come in various sizes and shapes. Hence, there is no need to worry about the size of the drainage or pipes being used. You can get very small and compact system that can navigate narrow pipes of one inch diameter with ease and still able to monitor the entire system giving you all the details necessary.

However, the small cameras are not able to pan or tilt and might not have additional features as those of larger cameras; this is due to their size. Nevertheless, they provide essential services. They are excellent when it come to maintaining and inspecting narrow pipes especially in potentially hazardous areas. Such cameras are highly effective for petrochemical plants. As for those industries that have got a complex drainage system need video drainage inspection cameras. With regular inspections, they are able to prevent unnecessary losses. It can be very costly if the company gets sudden breakdowns in their system.

In most cases, video drain inspections are designed for any possible eventuality and need. You may need the small cameras to monitor you drainage, the larger ones, or the highly sophisticated depending on the need. The cameras are made to provide the client with an accurate condition of what is going on in the system hence they are able to prepare themselves for any possible eventuality that they may foresee. Drainage inspection has never been made easier, time saving, and cost effective, as is the case when you use a video drainage inspection system.

Typical Residential Plumbing Problems

By admin . October 22, 2010 . Filed in Uncategorized. No comments »

The first place to start when fixing or dealing with plumbing issues is the source of the problem, whether a leak or a clog. When the issue has been determined, one can either repair the leak or replace the whole system. Several plumbing issues affect all households and the difference is the nature of occurrence. We have the lack of hot water running from the tap and the main cause is that the water heater is clogged up with calcium deposits and this affects the amount of heated water it can produce this can be repaired  by cleaning the calcium from the system or all the heating elements or just replacing the whole heating system.

Another one of the typical residential plumbing problem is a leaky faucet, the broken seal of the faucet handle cause this, it can be repaired by fixing the faucet handle by just repairing the seal, and the faucet works. In most households, we also have clogged toilets where plunging usually works. In the event that this does not work, it could be a sign of serious plumbing issues. Other than clogged toilets, we have slow flashing toilets and this is normally sorted by simply raising the float in the toilet bowl so that the water level of water can be measured and thus there is no time that the water level is so low such that there is no water to flush. Another typical residential plumbing problem is slow draining sinks that are a common household problem. Usually elements like bleach and vinegar are poured into the drain to disassemble the particles but water could also be used where the sink is filled with water and then it is drained this is effective in that the volume just practically pushes the deposits down the drain.

Another typical residential plumbing problem is the pipes under the sink leak, before anything else make sure that the fixture of the sink is not clogged and if it is not make sure to check for any other cause which could be that the double pipes. If there is a crack then replacement is the only available option. Plumbing has two sections, the first deals with the taking of fresh water into the house and the other deals with the removal of dirty water, which in other words makes up the drainage system and this is the three-part system of DWV, which translates to drainage, waste and vents.

In all residential homes, if any of the fixtures have been affected and they either have a leak or have broken, the first thing to do is to find valves near the appliances and shut them off. This is done for the sake of precaution, and means that if the problem is of a complicated nature and can cause great damage, though expensive, a professional should be consulted to ensure that the system runs as it is supposed to. All residential homes, either rented or owned, have plumbing issues that come up occasionally but a plumber a day keeps the leak at bay.

Tips on Home Re-piping

By admin . October 18, 2010 . Filed in Uncategorized. No comments »

Hiring labor has become expensive of lat. A number of people are doing some of the home repairs on their own. Some of these repairs may be things such as repairing leaking sinks or home re-piping. It is possible to do home re-piping even if you have never done it before. A number of things need to be taken into account to avoid any further damages, frustrations and at the same time save money. First, you need to ensure that your plan on the re-piping job is thorough. Do a lot of research on the internet, buy books on plumbing that will guide you, lay down a plan, go through all the details, and seek advice from a local plumber. Plan everything out.

From here, you can then determine what type of building materials will be best for your work. Have a look at the different water supply pipes that are available in the market. It would be easier to work with plastic or rubber water pipes as compared to using the copper ones. If you can get Pex water supply system then your work is bound to be fur much easier. Just before you begin working, you should ensure that all the supply valves are off. You want to have a clean and clear working environment to be able to know what is going on, you do not want water pouring everywhere that may cause damages.

You then need to think a lot if you can do the job a lone or need assistance from someone else. In case you are not so sure that you can do the job on your own, then it would be advisable to source for help from someone else. It is important that you get someone who has done the job before because at time it might become difficult to buy some of the building materials that may be needed to re-pipe. You will need guidance on what materials will be best for the job. Fifthly, you need to consider the amount of demolition that may be needed. Did you factor it in the earlier stages of planning or does the degree of demolition match with what you had earlier planned. You will need to do some demolition to have access to some of the fixtures and shut off valves. You also have to look at easier ways of doing things without having to cause a lot of damage. For example, you do not have to remove the sink just to repair the tap while you could have just drilled a hole from behind.

Therefore, you must know that home re-piping is not an easy job. You will need to do more than just re-piping; you will have to do repairs on walls, remove tiles or sinks, and demolish other things that may be on the way. It is hence critical to plan well ensuring that you get advice from people with experience and plumbers. Make sure you have all the necessary details correct and try as much as possible to cover all angles.